X-Core - Connecting a Hunter Remote


Install a ½" female threaded “Tee” in the field wiring conduit approximately 12" below the X-Core.


Feed the red, white, and blue wires of the harness through the base of the “Tee” and into the wiring compartment as shown.


Screw the SmartPort harness housing into the "Tee" as shown.


Attach the red, white, and blue SmartPort wires to the controller terminal as shown

  • Red wire to left side "24VAC" terminal
  • White wire to right side "24VAC" terminal
  • Blue wire to "REM" terminal

Still need help? We're here.

Tell us what you need support with and we'll find the best solution for you.

Contact Support