ICD-HP - Cable and Lead Connections

  • USB: The supplied USB cable will power the ICD-HP from a laptop or desktop computer port.
  • Connect the larger USB A connection to a standard computer USB.
  • Unscrew the blue protective cap over the ICD-HP’s USB port on the end of the programmer.
  • Connect the mini-USB to the ICD-HP. Do not force the connector the wrong way!
  • Replace the protective cap when this port is not in use, to prevent water damage.
  • Any standard USB to mini-USB cable will work as a replacement.
  • Red and Blue Leads: Connect the straight connectors by pushing all the way into the matching colored plugs.
  • Programming Cable: Keep the cable connectors clean and free of mud and dirt! Connect both ends before placing the cable in a valve box or other dirty location.
  • Connect either end of the cable to the connector on the ICD-HP. Align connector slots with female connector on programmer, push straight in, and turn 90 degrees until the connector locks into place.
  • Connect the other end of the Programming Cable to the Programming Cup in the same way.

Still need help? We're here.

Tell us what you need support with and we'll find the best solution for you.

Contact Support